Advertisement
Use the same type and the same power of bulb (suggest to purchase it from
die dealer or the factory di reedy), install it according to the negative step.
When you install it, please don't touch the glass part of bulb with hands and
oiliness things.
Note: While installing the bulb, both ending screws of bulb should be
tightened greatly, otherwise maybe get fire or damage the lamp.
Operation Description:
Please check if die power voltage is suit for the rated voltage first before
turning it on, high or low voltage both will influence the service life and the
effect of light, please necessarily stabilize the technique parameter of input
power voltage in use. In the area in which the voltage changes greatly, 220v
is suggested in order to meet the rated voltage of the light equipment. The
product is the top-protecting equipment the earth line should connects with
the earth perfectly. Insure the safe usage.
This lamp has die thermo-protect function and can switch on to postpone, the
host computer chip will need 30 seconds to start reset after turning on the
lamp;
Note: It is better to turn on the bulb first, then turn on the circuit board after the
bulb is turned on steady. (In order to avoid disturb the circuit due to high
voltage).
Item No
Bulb
Rated voltage
Power consumption
Optical system
Cooling system
Cover
Motor
Function color
Strobe description
Zoom in and Zoom out
Control way
Working environment
www.flash-butrym.pl
Main technique parameter
HW-B001
HMI 1200
AC220V-240V 50Hz- 60 Hz
1500W
Concave Reflector Adjustable optical convex lens
Strong fans cooling system
The wreath oxygen sprays the paint
Control 5 mini-step motor through an internal micro-processing system
The vacuum plating glass 5 main color, mixed color+ open
7 class of adjustable strobe speed
Adjust Zoom via mini-step aperture
The front-panel controlling
Standard DMX512 signal controlling 4 DMX channels
Indoor(20 *C – 40 *C
Page 3
Advertisement
