Advertisement
Quick Links
Advertisement
Summary of Contents for magic lite 1200W DMX Follow Spot Light
- Page 1 1200W DMX Follow Spot Light User’s Manual Page 1 www.flash-butrym.pl...
- Page 2 Preface: Thanks for your use of our product-Follow Spot. The advanced product has the multi-functions and multi-uses in modem optics, which can be used widely in dancing and sing hall, recreations and circuit performs. Information: In order to insure your use of this light for long time, safely and credibly, please read this Manual Instruction carefully before using, therefore you will be away from the unnecessary malfunctions and injury.
- Page 3 Use the same type and the same power of bulb (suggest to purchase it from die dealer or the factory di reedy), install it according to the negative step. When you install it, please don’t touch the glass part of bulb with hands and oiliness things.
- Page 4 DMX512 Connection Controller output 1DMX512 standard signal, connects via output and input...The three pin XLR 1 is grounding, 2 is negative and 3 is positive, or change 2 and 3 (The controller generally don’t need to change these two pins). The length of signal cable should be within 100 meters, to avoid die interference by other electric appliances because of too long signal cable.
- Page 5 Example 2: If the controller has 16 channels, die start address of the first light is 0, and the relevant address is 0 ,so and die first light should turn on ADD 10; the formula of the second light is 16, so the second lamp should turn on ADD 5 and 10;...the formula value of the sixth light is 16+16+16+16+16=80(80=16+64), so the sixth light should turn on 5 and 7 +10 .And so on.
- Page 6 This light equipment can be delivered by any conveyance after packed, but should avoid rain, snow and damage the equipment. This light should be kept in the temperature of -20—40t2. The harmful air or flammable and easy-exploded chemical objects should be keep away from the warehouse, and the violent vibration and strong magnetic field interferences should also be avoided.
- Page 7 For to avoid interference of anti-signal, the power supply and controllers of each light must connect with the ground and the connection must be good and dependable. Keep maintain the equipment timely. (Include the examination of the screws, the lamp sweeps etc..) The operation hint: The operation method, the guidance and the notices are jotted down very simple in the book, so read it carefully before use the product.
- Page 8 1 — 9: To set of ADD No. of the light 10: ON is DMX5123 model; OFF is panel control model. DMX512 Channels Description Channel I: strobe Channel 2: zoom in and zoom ont Channel 3: color wheel Channel 4: color temperature Panel Description Confirm the DIP ADD NO.