Compression Damping Of Fork; Rebound Damping Of Fork; Spring Preload Of The Fork - KTM 125 EXC, EXC SIX DAYS, 200 XC, XC-W, EXC, 250 XC, XC-W, EXC, EXC SIX DAYS, 300 XC, XC-W, EXC-E, EXC-E SIX DAYS Owner's Manual

OPERATION INSTRUMENTS
2
14
5
6
»
Compression damping of fork (XC)
Hydraulic compression damping determines the reaction when the fork is com-
pressed. The degree of compression can be adjusted with adjusting
screws at the top of the fork legs.
Turn the screw [1] clockwise to increase damping, turn it counterclockwise
1
to reduce damping during compression.
STANDARD ADJUSTMENT:
– turn adjusting screw clockwise as far as it will go
– turn it back by as many clicks as are specified for the relevant type of fork
Typ WP Suspension 14187D27 . . . . .20 clicks
Typ WP Suspension 14187D28 . . . . .20 clicks
Rebound damping of fork (XC)
Hydraulic rebound damping determines the reaction when the fork is
rebound. Remove the protecting cap [2].
By turning the adjusting screw [3], the degree of damping of the rebound can
be adjusted. Turn the knob clockwise to increase damping, turn it counter-
clockwise to reduce damping during rebounding.
STANDARD ADJUSTMENT:
– turn adjusting screw clockwise as far as it will go
– turn it back by as many clicks as are specified for the relevant type of fork
3
Typ WP Suspension 14187D27 . . . . .21 clicks
Typ WP Suspension 14187D28 . . . . .21 clicks
Compression damping of fork (XC-W, EXC, EXC-E)
Hydraulic compression damping determines the reaction when the fork is com-
pressed. The degree of compression can be adjusted with adjusting
screws at the bottom of the fork legs.Remove the protecting cap [4].
Turn the screw [5] clockwise to increase damping, turn it counterclockwise
to reduce damping during compression.
STANDARD ADJUSTMENT:
– turn adjusting screw clockwise as far as it will go
– turn it back by as many clicks as are specified for the relevant type of fork
Typ WP Suspension 14187D02 . . . . .22 clicks
5
Typ WP Suspension 14187D04 . . . . .22 clicks
4
Typ WP Suspension 14187D33 . . . . .20 clicks
Typ WP Suspension 14187D34 . . . . .24 clicks
Rebound damping of fork (XC-W, EXC, EXC-E)
Hydraulic rebound damping determines the reaction when the fork is
6
rebound.
By turning the adjusting screw [6], the degree of damping of the rebound can
be adjusted. Turn the knob clockwise to increase damping, turn it counter-
clockwise to reduce damping during rebounding.
STANDARD ADJUSTMENT:
– turn adjusting screw clockwise as far as it will go
– turn it back by as many clicks as are specified for the relevant type of fork
Typ WP Suspension 14187D02 . . . . .22 clicks
Typ WP Suspension 14187D04 . . . . .20 clicks
Typ WP Suspension 14187D33 . . . . .22 clicks
Typ WP Suspension 14187D34 . . . . .22 clicks
Spring preload of the fork (XC-W, EXC, EXC-E)
The fork's preload can be adjusted by means of the adjusting screws [7]. Use
a 24 mm fork wrench. More information is provided in the chapter "Adjusting
the fork and shock absorber."
7