Indicator Lamps (Exc); Short Circuit Button - KTM 125 EXC, EXC SIX DAYS, 200 XC, XC-W, EXC, 250 XC, XC-W, EXC, EXC SIX DAYS, 300 XC, XC-W, EXC-E, EXC-E SIX DAYS Owner's Manual

OPERATION INSTRUMENTS
display
X SPEED / H
X X SPEED / CLK
X X SPEED / LAP
LAP / LAP
X
X SPEED / ODO
X X SPEED / TR1
X X SPEED / TR2
X X SPEED / A1
X X SPEED / A2
X X SPEED / S1
X X SPEED / S2
10
If the CLK, LAP, TR1, TR2 A1, A2, S1 and S2 figures are suddenly cleared, the battery in the electronic speedometer is empty and
must be replaced (see: Replacing the battery in the electronic speedometer).
A tripmaster switch is available as an accessory that lets you control the electronic speedometer functions from the handlebar.
2
»
OVERVIEW OF THE ELECTRONIC SPEEDOMETER FUNCTIONS
briefly press + button briefly press – button
no function
no function
starts/stops LAP without stops LAP, stores LAP
clearing LAP figure figure, resets LAP to 0
next figure
no function
no function
increases the TR2 figure reduces the TR2 figure
no function
no function
no function
starts - stops S2
1
3
briefly press
no function next display mode
no function next display mode
next display mode
no function next display mode
no function next display mode
no function next display mode
next display mode
no function next display mode
no function next display mode
no function next display mode
no function next display mode
Indicator lamps
The green control lamp [1] flashes in the same rhythm as the
flashing indicator when the indicator is working.
The blue control lamp [2] lights up when the high beam is on.
Short circuit button (XC, XC-W)
The short circuit button [3] turns off the engine. When pressing this button,
the ignition circuit is short-circuited.
button hold button 3 secs.
displays the SETUP menu
setting the clock menu
clears all LAP figures
next display mode
next display mode
clears TR1, S1, A1
clears TR2
clears TR1, S1, A1
next display mode
clears TR1, S1, A1
clears S2