Computer Setup (Bios), Multiboot, And Hp Pc Hardware Diagnostics (Uefi); Using Computer Setup; Starting Computer Setup; Navigating And Selecting In Computer Setup - HP Laptop User Manual

12 Computer Setup (BIOS), MultiBoot, and
HP PC Hardware Diagnostics (UEFI)

Using Computer Setup

Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input
and output devices on the system (such as disk drives, display, keyboard, mouse, and printer).
Computer Setup includes settings for the types of devices installed, the startup sequence of the
computer, and the amount of system and extended memory.
NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the
computer from operating properly.

Starting Computer Setup

NOTE: An external keyboard or mouse connected to a USB port can be used with Computer Setup
only if USB legacy support is enabled.
To start Computer Setup, follow these steps:
1. Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
2. Press f10

Navigating and selecting in Computer Setup

To navigate and select in Computer Setup, follow these steps:
1. Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
NOTE:
keyboard to navigate and make selections in Computer Setup.
2. Press f10
ENWW
to enter Computer Setup.
You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the
to enter Computer Setup.
esc while the "Press the ESC key for Startup
esc while the "Press the ESC key for Startup
Using Computer Setup 93