Operation; Installation; Inserting The Battery; Removing The Empty Battery - Helios H-45L Operation Manual & Spare Parts List

5. Operation

(1) Installation

Inserting the Battery

Insert the battery from the top downward to the bottom into the battery slot of the tool until
hear the "click" sound. (refer to Fig. a) When the LED lights on GREEN shortly, the
battery is installed correctly.
(Fig. a)

Removing the Empty Battery

If the LED lights on RED while tensioning or welding, that means the battery is exhausted.
Please push the unlatching buttons (red color) on the top of the battery to take off the
battery.
Warning!
The last welding on the package might not have sufficient seal efficiency
and you would need to do it again after recharging the battery.
- 5 -