Maintenance - Helios H-45L Operation Manual & Spare Parts List

6. Maintenance

Please take off the battery before doing maintenance.
(1) Use air gun to clean the area around Tensioning Wheel (H45-10090) and Gripper
(H45-10070/H45-10071) and the area around Cutter (H45-40090) daily. Be sure to use the
air gun by blowing the debris from the left side to avoid any debris blowing to inside of the
tool.
Air blow
(2) If air gun could not dislodge the debris between the teeth of Tensioning Wheel (H45-10090),
PET (or other plastic) is suggested to dislodge the debris by sharing the tip.
Please do not use any metal material or hard material to clean the teeth to avoid any damage
to the teeth.
H45-10090
H45-10070/10071
Air blow
H45-10090
PET strap
- 9 -
H45-40090