Table of Contents
Advertisement
1. General Safety Rules
Warning:
DO NOT attempt to operate the tool until you have read and understood all instructions and
safety rules contained in this manual. Failure to comply may result in accidents involving
fire, electric shock, or serious personal injury.
reference and review it frequently for safe operation.
Work Area
a. Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b. Do not operate Power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
c. Keep bystanders, children and visitors away while operating a tool. Distractions can
cause you to lose control.
Electrical Safety
a. Charger's plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
d. Do not abuse the cord of charger. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
Personal Safety
a. Stay alert, watch what you are doing and use common sense when operating a tool.
Do not use a tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious
personal injury.
b. Use personal protective equipment.
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
c. Avoid accidental starting. Ensure the switch is in the off-position before insert
Battery. Carrying tools with your finger with the switch on invites accidents.
d. Remove any adjusting key or wrench before operation the tool. A wrench or a key
left attached to a rotating part of the tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables
Save this owner's manual for future
Always wear eye protection.
- 1 -
Protective
Hide quick links:
Advertisement
Table of Contents
