For Technical Support - Shark UV180 Owner's Manual

Aspiradora Vertical
1. Mango superior
2. Manguera flexible
3. Cuerpo principal
4. Escobilla para polvo
5. Conector de manguera
6. Boquilla para rendijas
7. Tubos de extensión encajados (x2)
8. Perilla de ajuste de altura
de alfombra
9. Cubierta de filtro HEPA
10. Panel frontal
Especificaciones Técnicas
Voltaje: 120V., 60Hz.
Potencia: 12 Amperes
11. Indicador de bolsa llena
12. Interruptor de encendido/apagado
13. Placa de bloqueo
14. Cabezal eléctrico
15. Liberación del mango
16. Luz frontal
17. Bolsas de polvo de papel
(x9) (
no aparecen)
11
Upright Vacuum
TO ORDER REPLACEMENT BAGS, FILTERS OR BELTS
for Model UV180
Call: 1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M.
Eastern Standard Time
visit our website: www.sharkvac.com

FOR TECHNICAL SUPPORT

for Model UV180
Call: 1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M.
Eastern Standard Time
Please Note:
The Pre-Motor Filter is washable. When washing the pre-motor
filter, let it air dry completely for 24 hours before re-inserting into the vacuum. It
should however be replaced every three (3) months to ensure peak performance of
your vacuum. The HEPA-TYPE filter should be replaced every 6 months.
Motor Thermostat
IMPORTANT:
This unit is equipped with a motor protective thermostat. If for
some reason the vacuum cleaner should overheat, the thermostat will
automatically turn the unit off. Should this occur:
• Push the On/Off button once.
• Disconnect the plug from the power source.
• Check the source of overheating problem. (i.e. clogged hose or filter)
• If clogged hose or filter is found, unclog the hose and replace the filters.
• Wait at least 45 minutes before attempting to reuse the vacuum.
• After unit has cooled down for 45 minutes, plug in the cleaner and push the
On/Off button. The vacuum should start again.
• If the vacuum still does not start, contact customer service at 1 (800) 798-7398.
or
8