Connector And Leds; Figure 1-1 Network Connector And Leds - KTI Networks KF223TX Installation Manual

1.2 Connector and LEDs

Figure 1-1 shows the connector and LEDs on the adapter. The fol-
lowing table describes these components.
No. Components
1 10/100 Mbps
network connector cable for 10Mbps or 100 Mbps
2 100Mb Link LED
3 10Mb Link LED
4 Activity status LED This LED indicates a receive or a

Figure 1-1 Network Connector and LEDs

Description
This RJ-45 connector requires UTP
connection.
This LED lights when 100 Mbps
connection is selected and active.
This LED lights when 10 Mbps
connection is selected and active.
transmission is in process.
2