KTI Networks KF223TX Installation Manual page 21

4. Select "Connectivity Test" and press [Enter].
5. Make sure an echo station is ready. Select "Start Network Link
Test" from "Connectivity Test" pop-up window and press [OK]
to start the test.
A status window will report several packet counters as shown below:
The "Transmit" counters indicate the number of good and bad pack-
ets which have been sent to the echo station. The "Receive" counters
show the number of good and bad packets echoed back from the
echo station. This test is also very useful in verifying a path between
two computers on the network.
16