Apn Setting; Apn Checking; Software Installation And Setting; Software Installation - Weiom PT-9 User Manual

12.2.2 APN setting

Set up the APN by sending a command as below.
Note: The tracker will keep the settings of GPRS and APN. When restoring the settings, please send the related commands to
the tracker.

12.2.3 APN checking

12.3 Software installation and setting

12.3.1 Software installation

Before installing the GPS Tracker Server software, you should install dotnetfx.exe and Google Earth.exe.
You can find the software from the Internet by following website or directly click on the button from this disc.
http://www.microsoft.com/downloads/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5&displaylang
=en
http://earth.google.com/download-earth.html
After having installed this two software, the user can go on to install the GPS Tracker Server software by double click GPS
track server setup.exe.
Weiom Technology Co., Limited
confirm
reply
As you can see on the left illustration. The complete
parameter is set in this format:
A,(APN),(Username),(Password),(router's IP
address),(Port) . It means separately "APN", "Username",
"Password" , "IP address" , "Port".
a: When you set the parameter, if you don't want to set
part of the parameter, you can leave it blank, but the
comma cannot be ignored.
b: The user will get a confirmation to the setting.
The user can check the GPRS setting by sending a
command to tracker: A,? The reply is as left.
APN: set the "access point name" to be your local APN
(Please refer to the table in the article 12.4 for your local
APN. If unavailable, please consult your local operator.)
Username: Please consult your local operator.
Password : Please consult your local operator.
IP address: set it to be your router's IP.
Port: set it to be the location data input port.
16