Restore The Default Value - Weiom PT-9 User Manual

For Speeding Alarm
The user can send a SMS command to turn on the Speed Alarm. The SMS command is as below:
The user can send "S,SPDOFF" to turn off the Speeding Alarm
For Geofence Alarm.
The user can send a SMS command to turn on the Geofence Alarm. The SMS command is as below:
The user can send "S,GEOFENCEOFF" to turn off the Geofence Alarm.

8.4 Restore the default value

The user can send a SMS command to restore the default value. The SMS command is as below:
Note: Only the numbers in the phonebook of PT-9 can set up and inquire about the device status.
Weiom Technology Co., Limited
Confirm
Confirm
Confirm
11