The completed setting as below:
12.1.2 Modem
For the modem, the user needs to obtain Internet IP address (WAN IP address). Set up the IP in the SIM card (Please refer to
article 2.2).
12.2 Settings on the mobile phone
Before using the GPRS function, the user needs to do the following settings on your mobile phone.
12.2.1 GPRS activation
Weiom Technology Co., Limited
confirm
confirm
The user should activate the GPRS function by sending the
command as left, this is in order to send locations data via
GPRS from the tracker to the computer. Then the tracker will
confirm with a message.
As well, the user can deactivate the GPRS by sending the
command: S, GPRSOFF.
15