Energy Saving Ideas - Kenmore 253.28452 User Manual

Hide thumbs Also See for 253.28452:
Table of Contents

Advertisement

First Steps
Door Removal
(non-electronic models)
If door must be removed:
1.
Gently lay freezer on its back, on a rug
or blanket.
2.
Remove two base screws and
base panel.
3.
Remove bottom hinge screws.
4. Remove plastic top hinge cover.
5.
Remove screws from top hinge.
6.
Remove top hinge from cabinet.
7.
Remove door and bottom hinge
from cabinet.
8.
To replace door, reverse the above
order and securely tighten all screws to
prevent hinge slippage.
Door Removal
(electronic models)
If door must be removed:
Door hinge is fastened with tamper-proof
screws. Please have a qualified technician
remove the door.

Energy Saving Ideas

• The freezer should be located in the coolest
area of the room, away from heat producing
appliances or heating ducts, and out of
direct sunlight.
• Let hot foods cool to room temperature
before placing in the freezer. Overloading
the freezer forces the compressor to run
longer. Foods that freeze too slowly may lose
quality or spoil.
• Be sure to wrap foods properly, and wipe
containers dry before placing them in the
freezer. This cuts down on frost build-up
inside the freezer.
• Freezer shelves should not be lined with
aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation,
making the freezer less efficient.
• Organize and label food to reduce door
openings and extended searches. Remove as
many items as needed at one time, and close
the door as soon as possible.
8

Advertisement

Table of Contents
loading

Table of Contents