Page 1
Tools and Controllers. The 32VDC (C)ESL6-Series Electric Screwdrivers are designed for exclusive use with specific Delta Regis controllers as defined in this manual. Do not attempt to use the tools and/or controllers with any products other than as specified in this manual.
Page 2
The ‘BECT6’ series controllers are for use exclusively with Delta Regis brand ‘ESL6’ series screwdrivers as specified on the following pages. Use of the controller (or screwdriver) with any other screwdriver (or controller) may result in malfunction, damage, or injury.
Page 3
32V (C)ESL6 Series Operation Manual Model Numbers and Specifications 32VDC Brushless Electric Screwdrivers (CE/RoHS) Start Torque Torque Length Diameter Weight Model Number (1,3) Type (In.Lbs) (Nm) Driver bit type (mm) (mm) (C)ESL610-ESD Lever 0.2 - 3.1 0.02 - 0.35 1000 (C)ESL610-ESD-HX Lever 0.2 - 3.1...
32V (C)ESL6 Series Operation Manual Set-up and Operation Push the spring guard end of the tool cable firmly into the mating cable connector on the screwdriver and secure the nut by hand. Do not overtighten. Attach the other cable end to the controller in the same manner.
There is no warranty of merchantability or fitness of purpose. In no event will Delta Regis Tools, Inc. be liable for business interruptions, loss of profits, harm, injury, damage, personal injury, cost of delay, or any other special, indirect, incidental, or consequential losses, costs, or damages.
This manual is also suitable for:
Cesl611-esdCesl610s-esdCesl612-esdCesl623-esdCesl623f-esdCesl623p-esd...
Show all