Multi-Wide Printing Feature - Krown 2000DLD Instruction Manual

VI

MULTI-WIDE PRINTING FEATURE

The Multi-Wide printing feature of your Memory Printer allows you to select three sizes of letters and
numbers that are printed on your TDD. These three sizes are:
PRESS:
To select Condensed Print, press and hold the [CTRL] key and press [C].
+
CTRL
To select Wide Print, press and hold the [CTRL] key and press [W].
+
CTRL
To select Normal Print, press and hold the [CTRL] key and press [N]
+
CTRL
NOTE: When the Memory Printer with the Multi-Wide printing feature prints in ASCII, the print will always be condensed
Print. The Memory Printer will remember the print width that you selected. For example, if you select Condensed Print
and then turn your Memory Printer off, your Memory Printer will be in Condensed Print mode when you turn it on again.
If you have the Memory Printer with large display or built-in strobe flash (MP2000DLVD &
MP2000DX) and want to turn on/off the printer, press [CTRL] + [P].
+
CTRL
Normal:
Condensed:
Wide:
C
W
N
P
20 characters/line
24 characters/line. These characters are a little smaller
than the Normal-Size characters. They may be used if
you wish to save paper by printing smaller characters.
12 characters/line. These characters are very large and
bold and are useful for people who have difficulty
reading the Normal-Size characters.
CONDENSED PRINT
WIDE PRINT
NORMAL PRINT
PRINTER IS ON
is display.
is displayed.
is displayed.
25