Table of Contents
Advertisement
Your incoming TDD calls will be answered, printed and stored in Memory Bank 5.
To answer an Incoming Call when the Auto-Answer is ON:
1. Press the [SPACE BAR] several times before or after Auto-Answer message is sent.
• The Auto-Answer is removed.
• The Memory Printer is now "on-line" with caller.
+
X
X
+
H E L L O G A
NOTE: Your Memory Printer will automatically disconnect and return to Auto-Answer after 60 seconds if neither person
is typing. If you need to prevent this from happening.
+
CTRL
0
IMPORTANT: To end your call and return to Auto-Answer:
+
CTRL
9
To turn Auto-Answer OFF:
+
CTRL
0
TO ACTIVATE REMOTE MESSAGE RETRIEVAL AND DELETION
The Remote Message Retrieval feature lets you retrieve your messages while away from home. You
may also delete (erase) these messages after you have read them. Be sure to first store a PIN in
location "0" of the Phone Directory (see page 17).
Set your Memory Printer to Auto-Answer (see previous page).
To retrieve your messages:
1. Dial your number.
• Auto-Answer will answer with your personalized message. The time and date will appear at
the beginning of each message.
2. Type your PIN after the message is finished.
• Make sure your PIN is 5 or more letters in length.
• All of your message will be sent to you.
3. The message:
"RE-ENTER UR PIN TO ERASE MESSAGES", will be received on your TDD screen.
4. If you wish to ERASE the message that you just received, type your PIN now.
DIRECT CONNECT WITH THE MEMORY PRINTER (CONT.)
X
AUTO ANSWER ON
AUTO ANSWER OFF
Alerts your caller that you are on
XXX
the line.
XXX HELLO GA
Type your greeting on the keyboard.
You will now not to disconnect.
NO TIMEOUT
You have now disconnected the phone
line and you are back in Auto-Answer.
23
Advertisement
Table of Contents
