Qwic D9.1 User Manual page 17

6 Handle bars
6.1 Desired handlebar setting
As a rule of thumb for determing the distance between the handlebar and the
saddle is that you should be able to touch the handlebars with your fist while you
hold your elbow at the point of the saddle. Note that this rule of thumb should be
seen as a guideline, because this setting is very personal. Note also that a too big
distance between the saddle and the handlebars, often can be the cause of neck,
back, and shoulder complaints. We recommend that you adjust the saddle and
handlebars to your wishes together with your dealer.
6.2 Adjusting the handle bars
You can adjust the height of the handlebars by, with the big lever up, tilt the
handlebars all the way down. After this, the Allen bolt is visible and accessible, after
loosening this bolt, you can adjust the height.
C
B
A
fig. 6.1
By the foldable bicycles (Smart-e) you can tilt the handlebars by loosen the Allen bolt
on the front. The height of the handlebars can be adjusted by turning the Allen Bolt
on the top. These bolts can be potentially covered by protective caps.
*Attention! Do not forget to tighten the bolts after adjustments and make sure that
your handlebars are attached firmly again.
15
QWIC Electric Bicycle Manual