Problem Solving Guide; Messages In The Display - Miele TKG 640 WP Operating Instructions Manual

With the help of the following notes minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.

Repair work to electrical appliances must only be carried out by a suitably
qualified person in strict accordance with current local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
Some of the messages in the display are more than one line long. Touch the  or
 sensor to read them in full.

Messages in the display

Problem
 lights up after
switching on

Adjust the load See 
lights up after a
programme is cancelled

 Service Fault F
lights up after a
programme is cancelled
Cause and remedy
Access via a code has been activated.
 See "Settings menu, Code".
This is not a fault.
In some programmes, if the drum has been
underloaded or is empty, the programme will be
cancelled. This can also happen if the items are
already dry.
 Open and close the door to resume drying.
 Dry individual items using the Warm air timed
drying programme.
No obvious cause.
 Switch the dryer off and then on again.
 Start a programme.
If the programme is cancelled again and an error
message appears, there is a fault. Contact the Miele
Service Department.

Problem solving guide

51