Miele TKG 640 WP Operating Instructions Manual page 19

Perfect Dry indicator
With programmes with a selectable
drying level, the Perfect Dry system
calculates the residual moisture present
in the laundry to ensure a precise
drying result.
The Perfect Dry indicator . . .
. . . will flash after the programme has
started and go out when the
programme duration appears in the
display.
. . . will light up again when the selected
drying level is reached and remain on
until the end of the programme.
. . . will remain dark with the following
programmes: Woollens handcare, Silks
handcare, Cool air, Warm air, Basket
programme.
Estimated time remaining
After the programme has started the
estimated programme duration will
appear in the display in hours and
minutes.
The programme duration displayed for
programmes with a selectable drying
level may vary or "jump". The following
factors, among others, affect the
programme duration displayed: the
quantity of the laundry, the type of
fabric and the residual moisture in the
laundry. The electronics continually
access conditions in the appliance and
adjust the programme duration with
increasing accuracy.
Operating the tumble dryer
Examples on how to operate the
appliance
Scrolling through a list
The  arrows in the display indicate
that a selection is available:
Automatic plus
Touching the  sensor scrolls down the
list to the next option and touching the
 sensor scrolls up the list to the next
option.
The OK sensor is used to confirm your
selection.
Identifying options selected
Normal
If an option has been activated with
OK, it will be given a tick.
Setting numerical values
Duration
A numerical value is highlighted in
white. Touching the  sensor
decreases the value and touching the
 sensor increases it. The OK sensor is
used to activate the value.
Exiting a sub-menu
Select  to exit a sub-menu.



0:20
h
19