Honda CTX1300 Owner's Manual page 58

USB Digital Audio Player
❙
To connect a USB device
!a Open the right fairing pocket.
!b Release the USB connector from the holder.
!c Connect the USB device to the USB
connector. The USB device status icon will
be displayed when the audio system
recognizes a USB device.
• Do not leave USB devices in the vehicle
(fairing pocket). High heat will damage it.
• Read precaution statements on the
provided instructions of your USB devices.
(P67)
USB connector
Holder
USB device
status icon
• USB devices can be charged with the USB
cable when the ignition switch is in the ON
or ACC position. The charging time may
be longer than usual.
• We recommend covering your USB devices
with soft fabric or cover to protect from
damage.
• Be careful not to let the USB connector get
wet.
• If the audio system does not recognize the
USB device, try reconnecting it a few times
or reboot the device.
• Some USB devices may not be compatible.
• Do not use hard disks, card readers, and
memory readers which may damage the
device and data. If you faultily connect the
one of them, turn the ignition switch off
and remove it.
• We recommend backing up your data
before playing it.
• Do not connect USB devices using a hub.
• Do not connect incompatible USB devices.
continued 55