Honda CTX1300 Owner's Manual page 54

Bluetoothr Audio Device
❙
To pair a Bluetoothr audio device
!a Select the audio mode 1 or 3 using the
(P50)
MODE button.
u The beep signal cannot be heard when
the mode 2 or 4 is chosen.
!b Press and hold the
(down) buttons. The Bluetoothr device
6
status icon (Bluetoothr mark and left arrow)
starts blinking and the short beep begins to
sound. The motorcycle is in pairing mode.
!c Select "Honda Motorcycle Audio" on an
audio device according to its manual.
Registration is completed, blink of the icon
will stop and the long beep (1 second) will
sound.
u If an audio device cannot be registered,
the short beep sounds three times and the
display returns to the ordinary display.
MODE and VOLUME
To end the pairing mode on the way, press
and hold the
MODE
(down) buttons.
After pairing, when the audio mode 1 or 2 is
selected with the registered audio device in
connectable state, the audio device will be
connected automatically.
Presence of a Bluetoothr device in the
vicinity sometimes affects the pairing.
Some Bluetoothr audio devices may not be
compatible.
In the following cases, registration will be
canceled.
• An another audio device is registered.
• The audio system is reset.
Bluetoothr device
status icon
and
VOLUME
6
(P54)
continued 51