Table of Contents
Advertisement
Installing or removing the microSD card
To install, please open microSD card lock first, and then place the microSD
card into the slot with the gold contact facing downwards. To remove the
external microSD card, please open microSD card lock and take it out
from the slot.
Before inserting/removing the microSD card, you should ensure the
phone is off, to protect it from corruption or damage. In addition,
regularly removing or inserting the SD card may cause the phone to
restart.
Installing or removing the battery
•
Insert and click the battery into place, then close the phone cover.
•
Unclip the cover, then remove the battery.
7040A USA UM_20140305.indd 17-18
17
Charging the battery
Connect the battery charger to your phone and mains socket respectively.
•
Make sure the battery is correctly inserted before connecting the
charger.
•
When using your telephone for the first time, charge the battery fully
(approximately 5 hours).
You are advised to fully charge the battery (
indicated by the percentage on screen while the phone is powered off. The
percentage increases as the phone is charged.
The charging status bar will not float if your battery is extendly
consumed. To reduce power consumption and energy waste, when
battery is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when not
in use; reduce the backlight time, etc.
). Charging status is
18
2014/3/5 20:48:27
Advertisement
Table of Contents
