SA-PAM-SAN-Eth
4.3 Back panel
The back panel of the SA-PAM-SAN-Eth-ROHS modem has:
POWER
•
The grounding bolt of the modem (option);
•
The "12Vdc / POWER " connector. The connection of the modem to the 220 V power supply
is implemented using an external power supply unit;
•
the "Monitor" connector to control the modem and store statistics;
•
"HUB" connector to connect the modem to the LAN using a straight Patch Cord;
•
the "DSL" connector to connect the modem to the leased physical line.
The back panel of the SA-PAM-SAN-Eth modem has additionally:
•
"PC" connector to connect the modem to the LAN using a straight Patch Cord;
The back panel of the SA-PAM-SAN-Eth/FXO/FXS modem has additionally:
•
The "LINE1" and ""LINE2" connector to connect to PABX (FXO model) or to telephone (FXS
model).
S-Access GmbH
Oberhausenstrasse 47
8907 Wettswil a/A
Switzerland
User Manual
xDSL
MONITOR
11
Page
32
of
HUB
Tel: +41 44 700 31 11
Fax: +41 44 700 31 03
Email:
contact@s-access.ch
WEB:
www.s-access.ch