Table of Contents
Advertisement
SIM (select models only)
NOTE:
should be removed, placed into a static-dissipative container, and then replaced when the computer
is reassembled.
Before removing the SIM, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the SIM:
1.
Press in on the SIM (1) to release it from the SIM slot.
2.
Remove the SIM (2) from the SIM slot.
Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
Downloaded from LpManual.com Manuals
The SIM is provided by the end-user as a security measure for the WWAN module. The SIM
Battery on page
50).
Component replacement procedures
51
Advertisement
Table of Contents
