Ram Configuration - HP 9000 Series 360 Service Handbook

RAM Configuration
Model 360 RAM is completely auto-configuring.
Each Model 370 RAM assembly must be configured for the total RAM
it contains:
• 4 Mbyte RAM controller board without add-ons must be set to 4
Mbyte block boundaries.
• 4 Mbyte RAM controller board with 4 Mbyte add-on must be set
to 8 Mbyte block boundaries.
• 4 Mbyte RAM controller board with 12 Mbyte add-on must be set
to 16 Mbyte block boundaries.
Maximum RAM is:
• Model 360 is 16 Mbytes, or one 12 Mbyte RAM controller board
with the processor.
• Model 370 is 48 Mbytes, or three 16 Mbyte 2-board assemblies.
Configuration
17