HP 9000 Series 360 Service Handbook page 16

Schematics
In support of the repair philosophy, this manual contains information to
the assembly level. Schematics are not available for these products.
Supported Configurations
Only computer systems with Hewlett-Packard approved parts, acces-
sories, peripherals, operating systems and application programs are sup-
ported by Hewlett-Packard. Any computer system with other than HP
approved hardware or software connected or installed must have the
non-HP approved hardware and software removed by the customer be-
fore On-Site or Service Center repair is accomplished.
Refer to the Series 300 Configuration Reference Manual (98561-90020)
for supported hardware/software products and combinations thereof.
2
Product Information