Error Messages And Troubleshooting - Electronika AutoSense User Instructions

• Check the meter with Check-strip as well.
• See chapter "Maintenance" and/or "Error messages and
troubleshooting" for further advice.
If the test result value is still outside the given range, contact your local
distributor and request assistance.

ERROR MESSAGES AND TROUBLESHOOTING

When using your AutoSense meter, error messages consisting of the
letter "E," followed by a number or letter, might appear on the display.
The cause of these errors may be incorrect use of the meter or a
problem with the meter. In case of an error message generated by
pressing any button, the meter will switch off automatically.
IMPORTANT!
Do not continue a test if an error message is displayed.
This section lists error messages, explains their meanings, and the
possible reasons for a malfunction.
D61-9201-2_ beliv.indd 49 D61-9201-2_ beliv.indd 49
49
2012.11.13. 15:32:38 2012.11.13. 15:32:38