Autosense System Checking; Checking With Check-Strip - Electronika AutoSense User Instructions

AUTOSENSE SYSTEM CHECKING

Checking the measuring accuracy of the meter is recommended after
every maintenance operation.
A check test of your AutoSense can be carried out with the supplied
Check-strip or with CareSens control solution. The CareSens control
solution can be obtained from the manufacturer upon request; an
additional charge applies (for the manufacturer address and phone
number, refer to the end of this manual). To perform system checking,
follow the steps of one of the checking options below.

Checking with Check-strip

Press the OK button and keep it pressed until "CHK" is
displayed, then release the OK button.
A flashing strip icon will be displayed, indicating that
the meter is waiting for strip insertion.
D61-9201-2_ beliv.indd 45 D61-9201-2_ beliv.indd 45
45
2012.11.13. 15:32:35 2012.11.13. 15:32:35