Table of Contents
Advertisement
at the end of the strip should be filled up completely if a sufficient
amount of blood has been applied (see pictures):
Sufficient amount of blood
Note:
The meter will switch on automatically upon insertion of the test
strip.
BEFORE TAKING MEASUREMENTS
Readings might be affected by:
• Skin contaminants: Always wash and dry your hands thoroughly
before taking your blood sample and using AutoSense meter. Wash
your hands with warm water, as this stimulates blood flow. If you
have difficulties obtaining your blood sample, try dangling your
arm downwards before pricking your finger. This helps to increase
blood flow.
D61-9201-2_ beliv.indd 17
D61-9201-2_ beliv.indd 17
Insufficient amount of blood
17
2012.11.13. 15:32:11
2012.11.13. 15:32:11
Advertisement
Table of Contents
