Electronika AutoSense User Instructions page 21

IMPORTANT!
• Verify that the code displayed
matches the code number on
the vial of test strips each time
you use your meter. The meter
will autocode each strip. The
code number can be any number
from 1 to 15.
• If the code displayed upon
insertion of a new strip does not
match the code printed on the
vial, DO NOT use the strip to
measure your blood glucose value.
WARNING!
After strip insertion AutoSense meter displays the strip's code number
until a sample droplet is applied. Verify that the code displayed matches
the code number on the vial of test strips each time you use your meter.
D61-9201-2_ beliv.indd 21 D61-9201-2_ beliv.indd 21
21
2012.11.13. 15:32:12 2012.11.13. 15:32:12