Table of Contents
Advertisement
device (e.g., the output of a keyboard or effect processor).
2. [INPUT 1] jack
You can connect a guitar, bass, or keyboard to this
monaural phone jack.
3. [INPUT 2] switch
Set this switch for the type of device connected to the
[INPUT 2] jack.
(MIC) INT: Use this setting if you're using the D4's
internal mic.
(MIC) EXT: Use this setting if you're using the
[INPUT 2] jack at mic level. This is appropriate for a
mic input.
LINE: Use this setting if you're using the [INPUT 2]
jack at line level. This is appropriate for a line-level
device. In this case, you can't use the top panel
[INPUT 2] mic input jack.
4. [INPUT 2] jack
You can connect a line-level device (e.g., the output of
a keyboard or effect processor) here. You can also use
this with the [INPUT 1] jack for stereo input. This is a
monaural phone jack.
When you use this jack, you can't use the top panel
[INPUT 2] mic input jack.
5. [MASTER OUT] jack
These jacks output the stereo audio signal. Connect
the D4 to your external monitor system or recording
equipment via these RCA-style jacks.
6. [PUNCH IN/OUT] jack
You can connect a pedal switch (sold separately: PS-1)
12
to this jack for perform punch-in/out recording.
7. [USB] connector
Use a USB cable to connect the D4 to your computer.
(→p.53)
8. [DC 9V] connector
Connect the included AC adapter to this connector.
9. [POWER] switch
This switches the D4 between On and standby.
3. Side panels
1
1. CARD slot
Insert CompactFlash media into this slot.
2. [PHONE] jack
Connect a pair of stereo headphones to this 1/8" mini-
phone jack.
3. [PHONE LEVEL] knob
This knob adjusts the volume level of the headphones.
3
2
Advertisement
Table of Contents
