Zooming/Location Desired Scene - Toshiba SD26VCR User Manual

Zooming
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
1
Press ZOOM during playback.
The centre part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM as follows.
1 2
(x 1.3) (x 1.5)
2
/ / /
Press
the frame.
You may move the frame from the
centre position to UP, DOWN, LEFT or
RIGHT direction.
In the zoom mode press ZOOM repeatedly to
3
return to a 1:1 view (
Notes:
• You can select the Pause, Slow or Search playback in the zoom
mode.
• Some discs may not respond to zoom feature.
Zooming/Locating desired scene
3 Off
(x 2.0)
1
to view a different part of
Off).
Locating desired scene
Use the title, chapter and time recorded on the DVD disc to
locate the desired point to play back.
disc, time and track are used to locate the desired point to
playback.
To check the title, chapter and time, press DISPLAY.
1
Press SEARCH during playback or stop mode.
• "Time" only works in playback or
resume stop mode.
2
Press or to select the "Time", "Title" or
"Chapter".
Press Number buttons (0–9) to change the
3
number.
• If you input a wrong number, press
CLEAR.
• Refer to the package supplied with
the disc to check the numbers.
4
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video CD playback with PBC, the Search (Jump)
function does not work. To turn off PBC, see page 50.
In the case of VCD/CD
ime
/
itle /6
Chapter
/
/Enter/0 9/Clear/Search
ime
/
itle /6
Chapter /
/Enter/0 9/Clear/Search
ime
/
/6
itle
Chapter 12
/
/Enter/0 9/Clear/Search
43