Table of Contents
Advertisement
Playback connection
The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for the
location of SCART socket.
Connection to a Satellite Receiver
If a Satellite Receiver is used, we recommend the following configuration:
Satellite
Antenna
Satellite
Receiver
To record from Satellite Receiver press AUX on the remote control of DVD/VCR. "L1" will appear on the front
display. Select the desired TV-program at Satellite Receiver.
Connection to a Decoder (for Premiere Programs)
DVD/VCR
Note: Make sure that AV - mode in SYSTEM SETUP - menu has been set
to DEC .
If you set to [AV], the output signal from the decoder will be seen on the TV
while the DVD/VCR is turned off.
12
DVD/VCR
SCART-cable (not
supplied)
SCART-cable (not supplied)
SCART-cable (not supplied)
RF-Output
SCART-cable (not supplied)
TV-unit
Cable TV-
connection
TV
Decoder
SYSTEM SETUP
CLOCK SET
LANGUAGE/üáúIK
AV2
[DEC]
RF OUT
[K]
SELECT :
/
ENTER : ENTER
EXIT
:
MENU
Advertisement
Table of Contents
