Table of Contents
Advertisement
One-touch Timer Recording (OTR)
The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
One-touch Timer Recording (OTR)
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press DVD/VCR to operate the DVD/VCR.
• Press DVD/VCR SELECT to select the VCR mode.
(The VCR indicator will light.)
Example: One-touch Timer Recording for 30 minutes.
1
Load a cassette tape with the erase
prevention tab intact.
2
Press SP/SLP to select the desired tape speed
SP or SLP.
3
Set "TV" or "CABLE" option to the appropriate
position
2I40301A-En_p40-43
Downloaded From Disc-Player.com Toshiba Manuals
The VCR will automatically turn on.
The tape counter and "SP" or "SLP"
will appear on the screen for about 4
seconds.
00 : 00 : 00 SP
!
.
TV
- VHF/UHF channels
CABLE- Cable TV channels
41
4
Press Direct channel selection buttons (0–9) or
CH +/– to select the channel to be recorded.
5
Press REC/OTR. Recording begins. Press the
button again to stop recording after 30 minutes.
Each additional press of REC/OTR will increase
recording time as shown in the chart below, up
to a maximum of 6 hours.
The OTR and recording time will
appear on the screen for about 4
seconds. And, "
the display.
Press
Recording time Press
once
NORMAL REC
6 times
twice
0:30
7 times
3 times
1:00
8 times
4 times
1:30
9 times
5 times
2:00
10 times
To cancel OTR
Press STOP or turn off the power.
"
" will appear on screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard
recording, press DVD/VCR SELECT to change to DVD mode
and perform the DVD playback
47
21/3/06, 9:44 AM
DVD/VCR
0–9
CH +/–
STOP
SP/SLP
DVD/VCR SELECT
REC/OTR
+0
" will appear on
Recording time
3:00
4:00
5:00
6:00
NORMAL REC
OTR 0 : 30
CH 110
INDEX
.
41
Advertisement
Table of Contents
