Table of Contents
Advertisement
DRC
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
Off:
It plays back at the recording level on the disc.
On:
Loud sound such as explosion or similar is toned
down slightly when played back. This makes it
suitable for when it is connected to a stereo.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
QSound
This DVD video player equipped with a "QSound". It can
produce the effect of being in a cinema or a concert hall.
Off: The QSound is disengaged.
On: The QSound operates.
Notes:
• The QSound setting can also be changed with AUDIO
on the remote control
• This function works only when the disc recorded with
Dolby Digital is played back.
• When this function works, the volume might changed.
• When the voice is distorted, turn off QSound.
2I40301A-En_p60-69
Downloaded From Disc-Player.com Toshiba Manuals
E.B.L.
DRC
Menu
Parental
: Off
: Off
: English
: Off
TV Screen
Subtitle
QSound
Set Password
: Off
: 4:3
: English
Output
Digital out
Display
Audio
: On
: PCM
: English
: Interlace
Picture Mode
DivX(R) VOD
: Auto
JPEG Interval
: 5 Seconds
Screen Saver
: On
##
.
67
Digital Out
Selected the output sound format corresponding to your
system connection.
PCM:
Select when connected to a 2 channel digital
stereo amplifier.
Bitstream:
Disc audio bitstream data will be output.
Notes:
•
When you make a connection to a TV, or Dolby
Surround Pro Logic or stereo system via the analog
audio jacks, select "PCM" or "Bitstream".
•
If apply HDMI connection to TV, make sure to select
"PCM", audio signal passing to TV via HDMI cable.
21/3/06, 9:46 AM
67
Advertisement
Table of Contents
