Gear Train And Camshaft; Components; Disassembly Procedure; Reassembly Procedure - Yanmar 2TNV70 Service Manual

4.3 Gear Train and Camshaft

4.3.1 Components

4.3.2 Disassembly procedure:

Disassemble in the order of the numbers in the illustration.
1) Perform steps 1) to 12) of the cylinder head disassembly procedure.
2) Remove the cooling water pump.
3) Remove the crankshaft pulley. (See Point 1 of 4.3.4)
4) Remove the gear case. (See Point 2 of 4.3.4)
5) Remove the fuel injection pump. (See Point 3 of 4.3.4)
6) Remove the idle gear assy. (See Point 4 of 4.3.4)
7) Remove the PTO drive gear. (See Point 5 of 4.3.4)
8) Remove the starting motor.
9) Remove the flywheel. (See Point 6 of 4.3.4)
10) Remove the camshaft assy. (See Point 7 of 4.3.4)
11) Remove the gear case flange. (See Point 8 of 4.3.4)
12) Remove the oil seal from the gear case. (See 4.3.6)

4.3.3 Reassembly procedure:

Reverse of the disassembly procedure.
4. Disassembly, Inspection and Reassembly of Engines
68