Write - Korg KONTROL49 Owner's Manual

[16] WRITE

Here you can save the current controller assignments as a scene.
You can save twelve different scenes in the KONTROL49's internal memory.
1 Hold down the [SCENE] key and press pad [16].
You will enter the WRITE page, and the [SCENE] key will light. The
main display will show the current scene number, and the
corresponding pad will blink.
2 Use the main encoder or the pads to select the writing-destination.
3 Press the OCTAVE SHIFT/CURSOR [®] key to proceed to "Name"
(select a name for the scene).
(Red)
4 Specify the desired name for the assignment. In Play mode, the name
you specify is shown in the main-display. For the procedure, refer to
"Inputting a name" ( p.22).
5 Press the OCTAVE SHIFT/CURSOR [®] key or the [ENTER] key.
The main display will ask "Sure ?" ("Are you sure you want to
write?").
(Green)
Press the [ENTER] key to execute the Write operation.
6
When writing is completed, the main display will indicate "Complete"
and you will return to Play mode. The scene you wrote will be selected.
If you press the [EXIT] key, the scene name will be displayed.
If you decide to cancel, press the [EXIT] key to return to Play mode.
Never turn off the power while writing; doing so may cause the internal
data to be damaged.
Operation–Scene mode
55