Message (Message Setting) - Korg KONTROL49 Owner's Manual

Midi studio controller
Hide thumbs Also See for KONTROL49:
Table of Contents

Advertisement

Press the OCTAVE SHIFT/CURSOR [®] key to move to "MSB/LSB
3
Select" (select the MSB and LSB).
You can specify that either bank select MSB or LSB will vary when you
hold down the [SETTING] key and turn the main encoder. The other
byte (LSB or MSB) will have a fixed value. In this page you can choose
which byte will have a fixed value.
(Green)
Press the OCTAVE SHIFT/CURSOR [®] key and use the [VALUE] dial
4
or pads to specify the value of the fixed Bank Select byte you chose.
The range is 0–127.
You can also press the [HEX LOCK] key and enter the value in
hexadecimal form.
5
Press the [ENTER] key.
The settings will be saved, and you will return to Play mode.
If you want to keep the changes you've made, save them in Scene mode.
If you turn off the power or select a different scene without saving, your
changes will be discarded. For details, see "Scene mode–[16] WRITE"
( p.55).

[14] MESSAGE (Message setting)

In the MESSAGE mode, you can create MIDI messages and assign them to
pads 9 through 16. These messages will be transmitted when you press the
pads (9 through 16) in MESSAGE mode.
1
Hold down the [SETTING] key and press pad [14].
Now you can make Message settings, and the [SETTING] key and pad
[14] will light. The main display indicates "Message Select" (select a
MIDI message).
(Green)
Use the main encoder or directly press a pad 9–16 to select the pad for
2
which you want to make settings. The selected pad will blink.
3
Press the OCTAVE SHIFT/CURSOR [®] key to move to "Message
Select" (select a MIDI message).
(Red)
4
Select the message you want to assign.
CtrlChg# (Control Change)
The specified control change message will be transmitted when you
press the pad. You can specify a fixed value that will be transmitted
each time you press the pad.
ProgChg (Program Change)
The specified program change message [Cn, mm] (n: channel, mm:
program number) will be transmitted when you press the pad.
BankSel (Bank Select)
The specified bank select message [Bn, 00, mm], [Bn, 20, bb] will be
transmitted when you press the pad. By specifying the MSB and LSB
values you can address a total of 16,384 banks.
Free Mesg (Free Message)
The specified message will be transmitted when you press the pad.
You can use this to assign and send more than one message.
Operation–Setting mode
(Green)
41

Advertisement

Table of Contents
loading

Table of Contents