Table of Contents
Advertisement
System Configuration
To view system power units configured
From the SiliconServer Admin page, click UPS Configuration.
To add a System Power Unit
For the server to be able to monitor the UPS, it must be registered with the UPS as a
PowerChute client. In a cluster, if the UPS is on the same subnet, then only one IP address (the
Administrative IP) needs to be registered; otherwise each server must be registered individually.
1.
From the UPS Configuration page, click Add.
2.
Enter the IP address of the power unit.
3.
Enter a user name for the UPS, e.g. apc.
4.
Enter the authentication phrase for the UPS.
5.
Confirm the authentication phrase.
6.
Check the Enable SNMP Traps box if the Titan SiliconServer is to receive traps from the
UPS. The UPS must also be configured to send SNMP traps to the Titan SiliconServer.
7.
Click Apply.
46
Titan SiliconServer
Advertisement
Table of Contents
