Blue Arc Titan SiliconServer System Administration Manual page 51

The Management Network page configures the private management network on the SMU's
eth1 interface. An address of 192.0.2.1 will be suggested. This address will not be seen on the
enterprise network, but must fall in a distinctly different range to the SMU's public address (i.e.
the address on eth0). This private IP address is also required to end with .1 so that the
management relationship the SMU has with secondary devices can be maintained more easily.
Once the IP address has been defined, click apply.
The NAT Port range is provided for information only. It is rare that these values will ever need to
be known.
System Administration Manual
Note: Remember the settings defined for this network so that they may be
referenced when configuring Titan's Administration Services IP address and
subnet mask.
Configuring the Management Network
39