Saving Your Song; 6: Structure - Korg D888 Owner's Manual

3) Press the PLAY button to begin playback (the button will light).
4) Press the STOP button to stop playback (the PLAY button will go dark).

5-4. Saving your song

On the D888, the song data that you have recorded or edited and the parameters
that you have set are automatically saved during the power-off operation when
you return the D888 to the standby mode. These settings are also saved when you
select a different song. This is called "auto-save".
You can also save data manually (→p.36 "1-4. Saving a song").

6: Structure

The following illustration is a simplified diagram showing the audio signal flow of the D888's re-
corder and how the knobs and faders control the sound.
Use section "A" to adjust the recording level from each channel input to the channel tracks.
While recording, you can use section "B" to adjust the monitoring tone and volume.
You can also use section "B" to make adjustments when playing back the recorded performance.
Use section "C" to adjust the level that is recorded on the master track and sent from the output.
Input
Channel mixer
Master track
A
INPUT
Trim
Ch Track
Recoder
EQ
Ch out
B
Ch Fader
To Effect
Eff Send
PAN
L
R
Master Fader
C
MASTER OUT
Ch 1
2
3
4
5
6
7
8
INDIVIDUAL
OUT
EFFECT
MASTER Trk
Recorder
MONITOR OUT
B
Effect
19