Chapter 3 Machine Disassembly - Acer AL1511 Service Manual

Machine Disassembly
This chapter contains step-by-step procedures on how to assemble the monitor for maintenance and
troubleshooting.
1. The screws for the different components vary in size. During the disassembly process, group the screws
NOTE:
with the corresponding components to avoid mismatch when putting back the components.
2. Note: The monitor surface is susceptible to scratching! Therefore, lay the monitor on a soft surface when
mounting or removing the base.
3. Wear gloves.
The tools for disassemble:
Process
Remove the
stand
Remove the
Screws-Driver
Resinous slice (Use
to remove the cover)
Special tool (Be used to
remove the VGA/DVI
screws)
Figures
22
Chapter 3
Remark
1. Put the LCD on a flat, soft and
clean surface.
2. Remove the 4 screws.