Front Panel Controls - Acer AL1511 Service Manual

Front Panel Controls

•
Power Button:
Press this button to turn the monitor ON or OFF, and display the monitor's state.
• Power Indicator:
Green —Power On mode.
Orange —Off mode.
NOTES
• MENU / ENTER:
Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu
when in Volume Adjust OSD status.
• </ Volume:
Activates the volume control when the OSD is OFF or navigate through adjustment icons when OSD is ON or adjust a
function when function is activated.
• >/ Volume:
Activates the volume control when the OSD is OFF or navigate through adjustment icons when OSD is ON or adjust a
function when function is activated.
• Auto Adjust button / Exit:
1. When OSD menu is in active status, this button will act as EXIT-KEY
(EXIT OSD menu).
2. When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.
Notes
• Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct
sunlight, or excessive dust or mechanical vibration or shock.
• Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your
monitor.
• For maximum protection, repackage your monitor as it was originally packed at the factory.
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth
lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive
cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
17