Abbott AlphaTRAK 2 Quick User Manual

Accuracy Made Easy
Quick User's Guide
AlphaTRAK 2 Meter Setup
®
Before performing a test, setup the volume,
time and date on your meter. With the meter off,
press and hold the m
until S-E-T appears. Press
reminder alarms.
Sound
To set the volume, press
No Sound Low Beep
m
Press to save your selection.
Time
To set the time:
Hour Minutes
c
Press to change the hour and minutes.
m
Press to save your selections.
m
Press to accept time format or
button for 3 seconds
m
to bypass the
c
Loud Beep
c
to change.
Date
To set the date:
c
To change the month, press to display the
correct month and m to save it. Do the same for
the day and year.
Press m to accept date format or
To save all your settings, press and hold down
for three seconds until the meter turns off.
Your meter is now set and ready to use. Follow the
steps on the other side of the Quick User's Guide to
perform a test.
For additional information, please contact Abbott Animal Health
Customer Service at: 888-299-7416 (US)/(CA) or +44 (0)1628 644354 (EU)
www.AlphaTRAKmeter.com
www.AlphaTRAKmeter.co.uk
www.AlphaTRAKmeter.ca
AlphaTRAK is a trademark of Abbott Group
of companies in various jurisdictions.
AT2-2064 © 2014 Abbott Laboratories
c to change.
m