Recording Stereo And Bilingual Programs; Searching Using Various Functions; Changing Menu Options - Sony SLV-D370P Service Manual

QQ
3 7 63 1515 0

Recording stereo and bilingual programs

Recording stereo programs
When you receive a program broadcast in stereo, press AUDIO to display "Hi-Fi" on the TV
screen. You can also select "Left," "Right," or "Mono." If there is noise in the stereo program,
select "Mono." The sound will be recorded in monaural (on both hi-fi and normal audio tracks)
but with less noise.
Recording bilingual programs
Press AUDIO to display "SAP" on the TV screen. When a SAP (Second Audio Program) is
received, "SAP" appears on the TV screen. When "MAIN" is selected, the VCR records only
the main sound.
Selecting the sound during playback
During playback, press AUDIO to select the sound you want.
To listen to On-screen display
Stereo Hi-Fi
Left channel Left
Right channel Right
Monaural sound on the normal audio track Mono
How sound is recorded on a video tape
The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the main track
along with the picture. Monaural sound is recorded onto the normal audio track along the edge
of the tape.
Monaural sound
Normal audio track
Hi-fi audio track
(main track)
Stereo sound
(left/right channels)
Notes
• To play a tape in stereo, you must use the A/V connections.
• When you play a tape recorded in monaural, the sound is heard in monaural regardless of the
AUDIO setting.
TE
L 13942296513
4
• Scan and Play (To search using the index
function):
Press b to scan ahead, or B to scan
1
backwards.
The VCR searches and then plays back for
about five seconds.
Press H PLAY to view the program.
2
If you do not press H PLAY, the VCR
automatically searches for the next index
mark, or until it reaches the end of the tape.
• Go to [0:00:00] (To search for the counter
0:00:00 point):
Press V.
The VCR starts searching and automatically
stops at the 0:00:00 point.
To mark a point on the tape that you want to
find later, press CLEAR to reset the tape
counter to "0:00:00."
• End search (To search for a blank portion of
the tape)
Press v.
The VCR starts searching and automatically
stops at the beginning of a blank space. If no
blank space is found, the VCR reaches the end.
Note
• Once in recording mode, if the VCR is put in pause and then released to start the recording,
no index mark will be inserted. An index mark will be inserted if the channel is changed
while VCR is put in pause.
www
.
http://www.xiaoyu163.com
Display window
STEREO indicator
STEREO indicator
STEREO indicator
No indicator
91 US
Recording stereo and bilingual programs
x ao u163
y
i
93 US

Searching using various functions

http://www.xiaoyu163.com
2 9
8
Searching using various functions
The VCR automatically marks the tape with
an index signal at the point where each
recording begins.
You can easily find a specific point using
various search functions.
1 Press SELECT VIDEO to control the VCR.
2
Insert an indexed tape into the VCR.
3
Press SEARCH.
Q Q
3 6 7 1 3
92 US
Searching using various functions

Changing menu options

You can change the tape length, auto play
and auto repeat settings. Normally the default
settings are used. Change these settings if
necessary.
Before you start...
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote.
1
Press SET UP when the DVD player is in stop
mode.
Press V/v to select
2
ENTER.
Press V/v to select the option to change.
3
.
94 US
Changing menu options
1-22
9 4 2 8
SELECT VIDEO
SEARCH
H PLAY
V/v/B/b
1 5 0 5 8 2 9 9 4
SET UP
V/v/B/b
ENTER
(VIDEO) and press
m
co
9 9
2 8 9 9