Sony SLV-D370P Service Manual page 14

QQ
3 7 63 1515 0
Hookup 2
Use this hookup if you are connecting a cable box with many scrambled
channels
What you can do with this hookup
• Record any channel by selecting the channel on the cable box
What you cannot do
• Record with the cable box turned off
• Record one channel while watching another channel
Cable box
Wall
DVD-VCR
After you have completed hookup...
After you have completed hookup, plug the DVD-VCR into an AC outlet and see
"Step 4 : Selecting a language" on page 20.
to AC outlet
TE
L 13942296513
4
Press SET UP to exit the menu.
www
.
http://www.xiaoyu163.com
Rear of TV
VHF/UHF
A Match the type of
connector on your
TV: A, B, or C.
or
VHF
B
For connector
UHF
or
types B and C, no
UHF connection
VHF
is required.
C
UHF
AC power cord
19
Basic hookups
x ao
y
i
21
Selecting a language
http://www.xiaoyu163.com
8
Step 4 : Selecting a language
You can change the on-screen display
language.
Before you start...
• Turn on the DVD-VCR and your TV.
• Set the TV to video input so that the signal
from the player appears on the TV screen.
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
Press SET UP, then press V/v to select
1
(OPTION) and press ENTER.
Press V/v to select "Language", then press
2
ENTER.
The "LANGUAGE/IDIOMA/LANGUE"
menu appears.
Press V/v to select the desired language, English, Spanish or French, then
3
press ENTER.
Q Q
3 6 7 1 3
US 20 US
Selecting a language
Step 5 : Setting the clock
You must set the clock on the DVD-VCR to use the timer features properly.
Using the Auto Clock Set feature
Some TV and cable channels transmit time
signals with their broadcasts. Your DVD-
VCR can pick up this time signal to
automatically set the clock.
The Auto Clock Set feature works only if a
channel in your area is broadcasting a time
signal. If broadcasters in your area are not
sending time signals, set the time manually
(page 24).
Before you start...
• Turn on the DVD-VCR and your TV.
When using a cable box, turn it on.
• Set the TV to video input so that the signal
from the player appears on the TV screen.
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
Press SET UP, then press V/v to select
1
(OPTION) and press ENTER.
Press V/v to select "Clock Set/Adjust", then
2
press ENTER.
The "CLOCK SET/ADJUST" menu appears.
u163
.
US 22 US
Setting the clock
1-4
2 9 9 4 2 8
SET UP
V/v
ENTER
1 5 0 5 8 2 9 9 4
SET UP
V/v/B/b
ENTER
O RETURN
m
co
9 9
2 8 9 9