Sony SLV-D370P Service Manual page 15

QQ
3 7 63 1515 0
Press V/v to select "Auto", then press
3
ENTER.
Press V/v to select the item you want, then press B/b to make the setting.
4
• For "Clock data CH"
Leave the setting to "Auto" to have the
DVD-VCR automatically search for a
channel that carries a time signal. Press
to select a channel that carries a time signal.
Use this option if you know of a channel that
carries a time signal. Most PBS member
stations broadcast a time signal. For the
fastest response, select your local PBS
station.
• For "Time zone"
Select the time zone of your area, or select
"Auto" to have the DVD-VCR automatically
set your time zone.
The options are:
Auto y Atl. (Atlantic) y East (Eastern)
y Cen. (Central) y Mtn. (Mountain) y
Pac. (Pacific) y Alas (Alaska) y
Haw. (Hawaii) y Auto
• For "Daylight saving"
Select "Yes" or "No" (standard time), or
"Auto" to have the DVD-VCR automatically
set the daylight saving time.
Press O RETURN, then press SET UP to exit the menu.
5
6 To activate the Auto Clock Set function, turn off the DVD-VCR.
TE
L 13942296513
Press V/v to select
3
ENTER.
4 Set the hour, minutes, month, day and year in
sequence by pressing B/b to select the item to
be set, and press V/v to select the digits.
The day of the week is set automatically.
5
Press ENTER to confirm the setting.
6 Press SET UP to exit the menu.
Note
• The clock display appears when VIDEO mode is selected with no tape inserted or when the
DVD-VCR is turned off.
www
.
http://www.xiaoyu163.com
B/b
continued
Setting the clock
" Manual " , then press
x ao u163
y
i
Setting the clock
http://www.xiaoyu163.com
2 9
8
Notes
• The clock cannot be set automatically if you do not receive a channel that carries a time
signal in your area. If so, set the clock manually (page 24).
• If there are only a few channels in your area that carry time signals, setting the clock
automatically may take up to about 20 minutes. If nothing happens even after you wait about
20 minutes, set the clock manually (page 24).
• If you made Hookup 2, make sure you leave the cable box on.
• The clock display appears when VIDEO mode is selected with no tape inserted or when the
DVD-VCR is turned off.
Using Manual Clock Set
Before you start...
• Turn on the DVD-VCR and your TV.
• Set the TV to video input so that the signal
from the player appears on the TV screen.
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
Press SET UP, then press V/v to select
1
(OPTION) and press ENTER.
Press V/v to select "Clock Set/Adjust", then
2
press ENTER.
The "CLOCK SET/ADJUST" menu appears.
Q Q
3 6 7 1 3 1 5
23 US 24 US
Setting the clock
Step 6 : Presetting channels
This DVD-VCR is capable of receiving VHF channels 2 to 13, UHF channels 14 to 69 and
unscrambled CATV channels 1 to 125. First, we recommend that you preset the receivable
channels in your area using automatic presetting methods. Then, if there are any unwanted
channels, disable them manually. If you have already decided which channels you wish to
preset, set them directly using manual presetting methods (page 28).
Presetting all receivable channels automatically
Before you start...
• Turn on the DVD-VCR and your TV.
When using a cable box, turn it on.
• Set the TV to video input so that the signal
from the player appears on the TV screen.
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
Press SET UP, then press V/v to select
1
(OPTION) and press ENTER.
co
.
25 US 26 US
Presetting channels
1-5
9 4 2 8
SET UP
V/v/B/b
ENTER
0 5 8 2 9 9 4 2 8
SET UP
V/v/B/b
ENTER
m
9 9
9 9