Advertisement
About AR-32P
This product of AR-32P ARCHI Recorder with DMX in & out interface, is a tension provider and
a junction box in the AP-32 system, and can be used via a combination with AR-32C.
Warning
1.The ground connection should be so essential for this unit.
2.Keep the unit dry, do not expose it to water or high levels of humid.
3.Do not open this unit, there is no user serviceable par t inside-Risk Of Electric Shock!
4.Turn off the power if not using this unit for a long time.
5.Any strong shocks or vibration may result in malfunction.
6.Do not attempt to dismantle or modify the unit.
7.This unit must only be operated by adults, do not allow children to play with it.
Caution!
When unpacking, please check the unit is not damaged. If something wrong has happened to
this product, contact the local dealer immediately.
All rights reserved. No part of this manual included with this product can be reproduced or
transmitted in any form, by any means for any purpose without authorized permission.
Product View
1
1.Power Switch: To switch the unit power on or off.
2.RJ45 connector: To connect with an AR-32C unit via this connector.
3.DMX IN (3-pin XLR connector): This connector is used to receive DMX signal.
4.DMX OUT (3-pin XLR connector): To feed the DMX signal to a DMX pack via this connector.
5.Fuse Protection: F0.5A AC250V 5x20mm.
6.Power In: To input AC 120V~60Hz main power via this connector.
Specifications:
Power input:
Fuse:
F0.5A 250V 5 20mm
Dimensions:
Weights:
-4-
About AR-32P
5
AC120 -60Hz
57 74 43mm
approx 0.2kg
6
3
4
2
Advertisement
